HELIX IK S10 shallow dual voice coil 10″ subwoofer
300w RMS dual voice coil, shallow depth 10″ subwoofer
Special Order Only
Features
- Chassis with particularly low installation depth – optimized for compact and shallow enclosure constructions
- 2 x 2 Ohms dual voice coil for flexible system configuration
- Magnet system with threaded hole on the back – allows screwing to the back panel of the enclosure for stabilization and reduction of enclosure vibrations
- Extremely stiff sandwich paper cone
- Long-excursion rubber surround for highest mechanical rating
- Rugged magnet cover with HELIX lettering for perfect magnet protection
- Enclosure connection terminal, grille and gasket included in delivery
Special Order Only
Technical data
| IK S10-DVC2 – 2 x 2 Ohms | ||
| Power handling RMS / max. | P | 300 / 600 Watts |
| Impedance | Z | 2 x 2 Ω |
| DC resistance | Re | 2 x 1.6 Ω |
| Resonance frequency | Fs | 34 Hz |
| Mechanical Q factor | Qms | 6.37 |
| Electrical Q factor | Qes | 0.49 |
| Total Q factor | Qts | 0.45 |
| Compliance | Cms | 198 μm/N |
| Equivalent air volume | Vas | 34 L |
| Force factor | B*I | 12.7 Tm |
| Sensitivity | SPL | 90.0 dB @ 2.83V / 1m 87.0 dB @ 1W / 1m |
| Cone area | Sd | 353 cm² |
| Moving mass | Mms | 112 g |
| Cone material | Sandwich paper cone | |
| Mechanical resistance | Rms | 3.73 kg/s |
| Voice coil diameter | ø | 50.8 mm |
| Voice coil winding height | 18 mm | |
| Max. linear excursion | Xmax | +/- 6.0 mm |
| Outer diameter | ø | 262 mm / 10.31" |
| Installation diameter | ø | 229 mm / 9.01" |
| Installation depth | 84.5 mm / 3.33" | |
| Recommended enclosure volumes | ||
| Sealed box | ||
| Net volume | 14 L | |
| Lower limiting frequency (-3dB) | 46 Hz | |
| Recommended DSP settings | Recommended "self-define" highpass filter with 45 Hz cut-off frequency and Q = 1.3; additional EQ filter 100 Hz / Q = 1.0 / -3 dB |
|
| Vented box | ||
| Net volume | 16 L | |
| Port diameter | ø | 70 mm / 2.76" |
| Port area | 38 cm² | |
| Port length | 38 cm / 14.96" | |
| Port tuning frequency | Fb | 37 Hz |
| Lower limiting frequency (-3dB) | 39 Hz | |
| Recommended DSP settings | Recommended "self-define" highpass filter with 37 Hz cut-off frequency and Q = 1.2; additional EQ filter 95 Hz / Q = 0.7 / -3 dB |
Reviews
There are no reviews yet.